www.RepairsUniverse.com - This Motorola Droid X Take apart guide shows how to safely take apart the Motorola Droid X so you can replace a cracked or damaged glass touch screen digitizer. All replacement parts and repair tools used and shown can be found here - http
-----
Related posts:
September 5th, 2011 at 6:20 pm
@308mtndrew Sounds like an issue with the buttons flex cable. I would check the connection on the cable underneath the buttons and be sure it is fully in place. If it appears to be, check for damage, like a small rip that may have occurred.
September 5th, 2011 at 7:18 pm
Hey when i put everything back together, the screen works and everything but the camera button, home key, search key, and menu key do not work? any ideas
September 5th, 2011 at 7:20 pm
@308mtndrew A few ideas are using some penetrating oil, such as WD-40. Apply it using a Q-tip to get the exact location and not have to worry about over spay. If that does not help and the screw becomes stripped, I suggest using a screw extractor to remove the screw, or use a small drill bit to drill out the screw and remove. These are your two easiest options.
September 5th, 2011 at 8:02 pm
At 4:12, i try unscrewing the screws but some are too tight to unscrew? any ideas
September 5th, 2011 at 8:56 pm
@GarrettRomines This is usually caused by a connection issue. Have you checked the connection to make sure it is fully in place? Has the phone had water damage? How did the LCD screen display before replacement?
September 5th, 2011 at 8:58 pm
I have replace the screen and hooked all the connections back up. My screen is still black but my phones on. Any other sugggestions?
September 5th, 2011 at 9:27 pm
CAN YOU POST A VIDEO ON PUTTING THE NEW DIGITIZER BACK ON?
September 5th, 2011 at 9:51 pm
@SallyBrown281 Can you not hear any sound from the ear speaker? How about the loud speaker (speakerphone)? Sounds like a connection issue, I would disassemble and check for issues with the speakers, flex cables, and especially the connections to the motherboard. Hope this helps, good luck!
September 5th, 2011 at 10:38 pm
everything is working fine but i cant hear or talk…why is that…it will play music threw speaker…but cant hear or talk?????? please help
September 5th, 2011 at 11:18 pm
@YaBoiiCELL Yes, the touch screen will be held in place with adhesive. We have a new video showing this process. Check it out! We have adhesive strips available at RepairsUniverse (dot) com. Good luck!
September 6th, 2011 at 12:07 am
do you have to glue the new screen in
September 6th, 2011 at 12:56 am
@Brandnom Double check all your connections, that is likely the issue.
September 6th, 2011 at 1:19 am
I tried to put this all back together and now my phone will turn on, but the screen stays black.